Effect of cinacalcet-mediated parathyroid hormone reduction on vitamin D metabolism in high-fat dietinduced obese mice / 한국영양학회지

Purpose@#Obesity is associated with alterations in vitamin D metabolism and elevation of parathyroid hormone (PTH). Increased PTH level in obesity is likely one of the factors contributing to the dysregulation of vitamin D metabolism. We investigated the effects of lowering the PTH level in high-fat diet-induced obese mice on vitamin D metabolism. @*Methods@#Five-week-old male C57BL/6N mice were fed either with control (10% energy as fat) or high-fat (60% energy as fat) diets ad libitum for 12 weeks, and vehicle or cinacalcet HCl (30 μg/g body weight) was gavaged daily during the final week of the experiment. The following groups were studied: CON (control diet + vehicle), HFD (high-fat diet + vehicle), and HFD-CIN (high-fat diet + cinacalcet HCl). PTH, 1,25-dihydroxyvitamin D (1,25[OH] 2 D), 25-hydroxyvitamin D (25[OH]D), calcium, and phosphate levels in circulation, and the expression of genes related to vitamin D metabolism in the liver and kidneys were determined. @*Results@#Renal 1α-hydroxylase expression in the HFD group was higher than that in the CON group despite the lack of a difference in the PTH levels between the 2 groups. The plasma PTH level in the HFD-CIN group was 60% lower than that in the HFD group (p < 0.05). In parallel, the HFD-CIN group had lower adipose tissue amount (9% lower), renal 1α-hydroxylase expression (48% lower), and plasma 1,25(OH) 2 D concentration (38% lower) than the HFD group. @*Conclusion@#Lowering the PTH levels in high-fat diet-induced obese mice recovered the expression of renal 1α-hydroxylase and might be associated with lower amounts of white adipose tissue.

Usefulness of Cycloplegic Refraction with Atropine in Patients with Partially Accommodative Esotropia

Purpose@#To investigate the usefulness of atropine (Isopto atropine 1% eye drops®; Alcon, Fort Worth, TX, USA) for cycloplegic refraction in patients with partially accommodative esotropia. @*Methods@#We retrospectively analyzed the medical records of patients with partially accommodative esotropia who underwent cycloplegic refraction using both cyclopentolate and atropine at Pusan National University Hospital between November 2017 and December 2020. Patients who replaced their glasses after cycloplegic refraction with atropine were included in group 1 and all other patients were included in group 2. Clinical features and the angle of ocular deviation were compared between the two groups. @*Results@#This study included 23 patients with a mean age of 58.2 ± 22.3 months and mean interval between the two examinations of 5.2 ± 4.1 months. Spherical equivalent was larger after cycloplegic refraction using atropine compared to cyclopentolate (+3.04 ± 1.70 and +2.31 ± 1.75 diopters, respectively; p = 0.001). Groups 1 and 2 included 19 (83%) and 4 (17%) patients, respectively. Clinical characteristics did not significantly differ between the two groups. In group 1, the angle of ocular deviation at near fixation significantly decreased from 28.7 ± 14.0 to 20.7 ± 11.6 prism diopters (p = 0.002) after correction of the refractive error. @*Conclusions@#Cycloplegic refraction with atropine may be useful for detecting latent hyperopia and managing strabismus in patients with partially accommodative esotropia.

Effect of heat treatment time on the properties of lithium disilicate glass-ceramics / 대한치과재료학회지

The objective of the present study was to investigate the effects of heat treatment (HT) time on the optical properties, mechanical properties, and microstructure of lithium disilicate (Li 2 Si 2 O 5) glass-ceramic blocks. Samples were prepared by cutting lithium disilicate glass-ceramic blocks – Amber® Mill Prototype (AMP) and IPS e.max CAD (IEC) – into a disc shape (diameter of 12 mm and thickness of 1.2 mm) and evenly polishing the surface. Each sample was heat treated according to the manufacturer’s manual and HT holding time was set to 15, 30, 45, and 60 minutes according to different groups. The samples were tested by color difference analysis using a spectrophotometer. X-ray diffraction analysis, HR FE-SEM observation, Vickers hardness test, fracture toughness test, and biaxial flexural strength test were carried out. The acicular crystals of lithium disilicate became coarser and less transparent with increasing HT time. The results for color difference (ΔE * ) compared to VITA A2 standard shade showed that the difference was significantly higher in the AMP groups than the IEC groups (P<0.05). Translucency parameter (TP) values were significantly higher in the AMP groups than the IEC groups (P<0.05). The AMP30 group showed the highest TP value, while all other experimental groups showed the tendency of decrease in TP value with increase in HT time. Moreover, increase in TP value was associated with decrease in contrast ratio. When fracture toughness was measured by indentation fracture method, both AMP and IEC groups showed similar results with 1.77 MPa·m 1/2 after HT for 15 minutes. However, as HT time increased, the IEC groups showed significantly higher values than the AMP groups (P<0.05). X-ray diffraction analysis results showed that quartz (SiO 2) and cristobalite (SiO 2) peaks were observed together with the lithium disilicate (Li 2Si 2O 5) peak in the AMP groups, whereas a lithium phosphate (Li 3PO 4) peak was observed together with the lithium disilicate (Li 2Si 2O 5) peak in the IEC groups. With respect to biaxial flexural strength in the AMP groups, the AMP15 group (HT for 15 minutes) showed the highest value of (524.09±89.95) MPa, whereas the AMP60 group (HT for 60 minutes) showed the lowest value of (446.56±76.75) MPa, with a significant difference between the two groups (P<0.05). In the IEC groups, IEC30 group showed the highest value of (668.51±158.57) MPa and the IEC45 group showed the lowest value of (517.37±129.52) MPa, with a significant difference between the two groups (P<0.05). Within the limitations of the present study, it is concluded that if increased strength is required when fabricating restorations using lithium disilicate glass-ceramic, then changing the HT time could be considered as long as such change does not significantly alter the color tone.

Traumatic Optic Neuropathy Aggravated by Orbital Emphysema after Orbital Fracture

Purpose@#To report a case of traumatic optic neuropathy aggravated by orbital emphysema after an orbital fracture.Case summary: A 19-year-old man with no specific medical history was referred for a right orbital fracture caused by blunt trauma to the supraorbital rim of the right eye. Computed tomography (CT) showed a right orbital fracture involving the inferomedial wall and inferomedial strut. The corrected visual acuity was 0.4 in the right eye (RE) and 1.0 in the left and the intraocular pressure was 15 and 18 mmHg, respectively. Restriction on downgaze, abduction, and an indefinite relative afferent pupillary defect (RAPD) were observed in the RE. Fundus exam was non-specific other than commotio retinae on the temporal side of the macula in the RE. After 12 hours post trauma, the visual acuity of the RE had decreased to light perception. Definite RAPD was observed with optic disc swelling on the fundus photo and optical coherence tomography. Orbital CT showed air shadows, which were not seen on the initial evaluation, adjacent to the optic disc. We diagnosed traumatic optic neuropathy aggravated by orbital emphysema. High-dose intravenous steroid was given for 3 days. Despite a lateral canthotomy and cantholysis to decompress the right orbit, visual acuity did not improve above counting fingers. @*Conclusions@#Increased intraorbital pressure and congestion caused by orbital emphysema may exacerbate traumatic optic neuropathy. Therefore, close observation is required.

The Influence of COVID-19 on Physical Activity, Sleep Quality, and the Quality of Life in Adults by Age Group

Purpose@#The purpose of this study was to identify changes in physical activity, sleep quality, and quality of life (QOL) during COVID-19 in adults by age group. @*Methods@#An online survey was conducted on a total of 160 participants who were divided into three groups by age; young adults, middle-aged adults, and old adults. The participants responded to the self-reported assessment of the impact of social distancing during COVID-19, International Physical Activity Questionnaire (IPAQ), Pittsburgh Sleep Quality Index (PSQI), and Short Form-36 Health Survey (SF-36). Descriptive statistics, analysis of variance, and Pearson’s correlation were used for data analysis. @*Results@#There were significant differences between the three age groups in physical activity (p < 0.05) and PSQI (p < 0.01) and a post hoc analysis showed that the young adults’ group had significantly higher physical activity than the old adults’ group, while the old adults’ group had significantly lower scores of PSQI (better sleep quality) than the others. The young adults’ group showed a significant negative correlation between the stress from social distancing and QOL (r = -0.27, p < 0.05) and between PSQI and QOL (r = -0.48, p < 0.05). For the middle-aged adults’ group, there was a significant negative correlation between PSQI and QOL (r = -0.53, p < 0.05). The old adults’ group showed a significant negative correlation between the stress from social distancing and physical activity (r = -0.35, p < 0.05) and PSQI (r = -0.50, p < 0.05), while there was a significant positive correlation between physical activity and PSQI (r = 0.30, p < 0.05) and QOL (r = 0.30, p < 0.05). @*Conclusion@#The results of this study could be used as basic data for the promotion of physical and mental health in the post-COVID-19 era

Effects of microstructural change of zirconia surface on tensile bond strength with resin cement / 대한치과재료학회지

This study was performed to evaluate the effects of microstructural change of zirconia surface on tensile bond strength with resin cement. The zirconia partially sintered block was cut into a size of 18 × 18 × 7 mm, and then the Zirface slurry (DMAX, Daegu, Korea) containing 15% and 30% zirconia was applied and followed by sintering at 1530 ℃ for 2 hours. Resin cement (PermaCem 2.0, DMG, Hamburg, Germany) was applied on zirconia specimen and polymerized to prepare an 18 × 18 × 14 mm block. In addition, for comparison of bond strength, specimens were prepared for the group that was polished and the group that was blasted at 3 atm using 110 µm alumina. Thereafter, all blocks were cut into a cross-sectional area of 1.0 × 1.0 mm to prepare 12 specimens. The specimens were immersed in distilled water at 37 ℃. for 10 days for aging treatment. A holder for tensile testing was attached to each of the specimens, and then a tensile force was applied at a crosshead speed of 0.5 mm/min to measure the fracture load. The fracture surfaces of each test piece was observed with a high-resolution field emission scanning electron microscope. Through the above tests, the following results were obtained. 1. On the blasted surface, zirconia grains were locally removed but on the Zirface treated surface, a porous microstructure was created on the zirconia surface. 2. Arithmetical mean deviation from the mean line ra was the highest in the blasted group and the lowest in the polished group, and as a result of Tukey analysis, there were statistically significant differences between all test groups (P<0.05). 3. The maximum tensile bond strength was 18.8±5.4 MPa in the Zirface 30% group, and as a result of Tukey analysis, there was a statistically significant difference from the other test groups (P<0.05). 4. As a result of observing the fracture surface after the tensile test with a high-resolution field emission scanning electron microscope, in the Zirface 30% group, cohesive fracture and interfacial fracture in the resin was observed, but the other test groups showed the interfacial fracture pattern. In conclusion, within the limits of this study, treating the zirconia surface with Zirface 30% to form a porous microstructure can contribute to the improvement of the bond strength between zirconia and resin cement.

Effects of microstructural change of zirconia surface on tensile bond strength with resin cement / 대한치과재료학회지

This study was performed to evaluate the effects of microstructural change of zirconia surface on tensile bond strength with resin cement. The zirconia partially sintered block was cut into a size of 18 × 18 × 7 mm, and then the Zirface slurry (DMAX, Daegu, Korea) containing 15% and 30% zirconia was applied and followed by sintering at 1530 ℃ for 2 hours. Resin cement (PermaCem 2.0, DMG, Hamburg, Germany) was applied on zirconia specimen and polymerized to prepare an 18 × 18 × 14 mm block. In addition, for comparison of bond strength, specimens were prepared for the group that was polished and the group that was blasted at 3 atm using 110 µm alumina. Thereafter, all blocks were cut into a cross-sectional area of 1.0 × 1.0 mm to prepare 12 specimens. The specimens were immersed in distilled water at 37 ℃. for 10 days for aging treatment. A holder for tensile testing was attached to each of the specimens, and then a tensile force was applied at a crosshead speed of 0.5 mm/min to measure the fracture load. The fracture surfaces of each test piece was observed with a high-resolution field emission scanning electron microscope. Through the above tests, the following results were obtained. 1. On the blasted surface, zirconia grains were locally removed but on the Zirface treated surface, a porous microstructure was created on the zirconia surface. 2. Arithmetical mean deviation from the mean line ra was the highest in the blasted group and the lowest in the polished group, and as a result of Tukey analysis, there were statistically significant differences between all test groups (P<0.05). 3. The maximum tensile bond strength was 18.8±5.4 MPa in the Zirface 30% group, and as a result of Tukey analysis, there was a statistically significant difference from the other test groups (P<0.05). 4. As a result of observing the fracture surface after the tensile test with a high-resolution field emission scanning electron microscope, in the Zirface 30% group, cohesive fracture and interfacial fracture in the resin was observed, but the other test groups showed the interfacial fracture pattern. In conclusion, within the limits of this study, treating the zirconia surface with Zirface 30% to form a porous microstructure can contribute to the improvement of the bond strength between zirconia and resin cement.

Dietary Assessment of Korean Non-dialysis Chronic Kidney Disease Patients with or without Diabetes

Background@#Dietary intervention at the early stage of chronic kidney disease (CKD) is important for preventing progression to the end-stage renal disease (ESRD). However, few studies have investigated dietary intake of CKD patients in non-dialysis stage. Therefore, we investigated the dietary intake of Korean non-dialysis CKD patients and aimed to establish baseline data for the development of dietary education and intervention strategies for CKD patients. @*Methods@#Three hundred fifty CKD patients who visited Seoul National University Hospital outpatient clinic from February 2016 to January 2017 were recruited for this cross-sectional study. Subjects on dialysis and those who had undergone kidney transplantation were excluded. Dietary intake, demographic information, and biochemical characteristics of 256 subjects who completed three-day dietary records were analyzed. Subjects were divided into four groups based on diabetes mellitus (DM) (DM-CKD and Non-DM-CKD groups) and kidney function (Early-CKD and Late-CKD groups). @*Results@#Total energy intake was lower in the Late-CKD group compared with the Early-CKD group. In men, carbohydrate intake was higher and protein and fat intakes tended to be lower in the Late-CKD group compared with the Early-CKD group. In women, carbohydrate intake tended to be lower in the DM-CKD group than the Non-DM-CKD group. Protein intake tended to be higher in the DM-CKD groups. Phosphorus and sodium intakes were higher in the DM-CKD groups compared with the Non-DM-CKD groups in women, and tended to be higher in the DM-CKD groups in men. @*Conclusion@#DM and kidney function affected energy and nutrient intakes. Subjects in the Late-CKD group consumed less energy than those in the Early-CKD group. Non-DM subjects seemed to restrict protein intake starting from the Early-CKD stage than subjects with DM. Subjects in this study had low energy and high sodium intakes compared with recommended levels. Protein intake was lower in advanced CKD patients, but their intake level was still higher than the recommendation. Dietary intervention strategies for non-dialysis CKD patients need to be customized depending on the presence of DM and kidney function.

Comparison of Retinal Layer Thicknesses of Highly Myopic Eyes and Normal Eyes

Purpose@#To evaluate the differences in individual segmental retinal layer thickness in adult patients with high myopia. @*Methods@#This study compared the retinal layers of patients with high myopia (axial length of ≥26.0 mm) with those of normal controls using spectral-domain optical coherence tomography. The thicknesses of the retinal layers were compared using nine Early Treatment Diabetic Retinopathy Study subfields. Choroidal thickness was also measured in the subfoveal area. @*Results@#We included 37 eyes with high myopia and 37 eyes of healthy subjects. The mean age was 42.95 and 47.73 years (p = 0.114), and the mean axial length was 27.28 and 24.47 mm (p < 0.001), respectively. The parafoveal areas (outer ring segment) of the ganglion cell layer and inner plexiform layer, all segmental areas except the subfoveal region of the inner nuclear layer, most segmental areas (inner superior, inner inferior, outer superior, outer temporal, and outer nasal) of outer plexiform layer, and most segmental areas (subfovea, inner temporal, inner inferior, inner nasal, outer temporal, and outer inferior) of outer nuclear layer were thinner in eyes with high myopia than in normal eyes (all p < 0.05). There were no statistically significant differences between the levels of photoreceptor layer, retinal pigment epithelium, and nerve fiber layer. The mean choroidal thickness was 153.81 ± 64.80 and 239.54 ± 44.28 μm in the high myopia and control groups, respectively, which were significantly different (p < 0.001). @*Conclusions@#In high myopia without pathologic changes, there was a meaningful thinning of the retina and choroid, especially in most Early Treatment Diabetic Retinopathy Study subfield areas of the deep vascular complex, perifoveal area of the superficial vascular complex, and most areas of the outer nuclear layer in the outer retinal layer, which are associated with myopic axial elongation.

Effect of investment materials on 3-point flexural strength of heat pressed zirconia core / 대한치과재료학회지

The purpose of this study was to evaluate the effect of the reaction between investment material and zirconia on the strength of zirconia in the application of heat-pressing method. Sixty specimens were cut (24 mm×4 mm×0.5 mm) into plates from Zirtooth ™ Multi O-9814 block (∅98×14T, HASS, Gangwondo, Korea) and sintered at 1450℃. Specimens were divided into 6 subgroups according to the depending on the investement material; (a) UN group (Control), (b) PH group (Prime vest HS), (c) CP group (Calibra-press), (d) BV group (BC-Vest), (e) MH group (Microstar-HS), (f) F1 group (Formula 1). Five investment materials were buried according to the procedure recommended by the manufacturer and left at room temperature for 30 minutes. The investment mold was dried and maintained at an elevated temperature of 850℃ for 50 minutes. Then, Amber Lisi-POZ LT (HASS) was placed in a thermoformed electric furnace (Programat EP3000/G2, Ivoclar Vivadent, Schaan, Liechtenstein) together with the mold, heated to 915℃ at an elevation temperature of 45℃/min, and moored for 15 minutes. The specimens were loaded to fracture in a universal testing machine and the fracture surface was examined by a field-emission scanning electron microscopy (FE-SEM). The surface of the zirconia specimen with the investment material was analyzed by energy dispersive X-ray spectroscopy (EDS). The 3-point flexural strength test showed the highest value (1265.5 MPa) in the UN group and the lowest value (756.1 MPa) in the F1 group. As a result of EDS analysis, the largest amount of Si was detected in the F1 group, and the most interfacial changes occurred as a result of FE-SEM analysis. It was concluded that when the zirconia is buried with the investment material and the heat press molding is performed, the state of the interface is changed due to the investment material at the bonding interface while the strength is lowered.

Comparison of Retinal Layer Thicknesses of Highly Myopic Eyes and Normal Eyes

Purpose@#To evaluate the differences in individual segmental retinal layer thickness in adult patients with high myopia. @*Methods@#This study compared the retinal layers of patients with high myopia (axial length of ≥26.0 mm) with those of normal controls using spectral-domain optical coherence tomography. The thicknesses of the retinal layers were compared using nine Early Treatment Diabetic Retinopathy Study subfields. Choroidal thickness was also measured in the subfoveal area. @*Results@#We included 37 eyes with high myopia and 37 eyes of healthy subjects. The mean age was 42.95 and 47.73 years (p = 0.114), and the mean axial length was 27.28 and 24.47 mm (p < 0.001), respectively. The parafoveal areas (outer ring segment) of the ganglion cell layer and inner plexiform layer, all segmental areas except the subfoveal region of the inner nuclear layer, most segmental areas (inner superior, inner inferior, outer superior, outer temporal, and outer nasal) of outer plexiform layer, and most segmental areas (subfovea, inner temporal, inner inferior, inner nasal, outer temporal, and outer inferior) of outer nuclear layer were thinner in eyes with high myopia than in normal eyes (all p < 0.05). There were no statistically significant differences between the levels of photoreceptor layer, retinal pigment epithelium, and nerve fiber layer. The mean choroidal thickness was 153.81 ± 64.80 and 239.54 ± 44.28 μm in the high myopia and control groups, respectively, which were significantly different (p < 0.001). @*Conclusions@#In high myopia without pathologic changes, there was a meaningful thinning of the retina and choroid, especially in most Early Treatment Diabetic Retinopathy Study subfield areas of the deep vascular complex, perifoveal area of the superficial vascular complex, and most areas of the outer nuclear layer in the outer retinal layer, which are associated with myopic axial elongation.

Effect of investment materials on 3-point flexural strength of heat pressed zirconia core / 대한치과재료학회지

The purpose of this study was to evaluate the effect of the reaction between investment material and zirconia on the strength of zirconia in the application of heat-pressing method. Sixty specimens were cut (24 mm×4 mm×0.5 mm) into plates from Zirtooth ™ Multi O-9814 block (∅98×14T, HASS, Gangwondo, Korea) and sintered at 1450℃. Specimens were divided into 6 subgroups according to the depending on the investement material; (a) UN group (Control), (b) PH group (Prime vest HS), (c) CP group (Calibra-press), (d) BV group (BC-Vest), (e) MH group (Microstar-HS), (f) F1 group (Formula 1). Five investment materials were buried according to the procedure recommended by the manufacturer and left at room temperature for 30 minutes. The investment mold was dried and maintained at an elevated temperature of 850℃ for 50 minutes. Then, Amber Lisi-POZ LT (HASS) was placed in a thermoformed electric furnace (Programat EP3000/G2, Ivoclar Vivadent, Schaan, Liechtenstein) together with the mold, heated to 915℃ at an elevation temperature of 45℃/min, and moored for 15 minutes. The specimens were loaded to fracture in a universal testing machine and the fracture surface was examined by a field-emission scanning electron microscopy (FE-SEM). The surface of the zirconia specimen with the investment material was analyzed by energy dispersive X-ray spectroscopy (EDS). The 3-point flexural strength test showed the highest value (1265.5 MPa) in the UN group and the lowest value (756.1 MPa) in the F1 group. As a result of EDS analysis, the largest amount of Si was detected in the F1 group, and the most interfacial changes occurred as a result of FE-SEM analysis. It was concluded that when the zirconia is buried with the investment material and the heat press molding is performed, the state of the interface is changed due to the investment material at the bonding interface while the strength is lowered.

Neuralgic Amyotrophy Associated with Cytomegalovirus Infection: A Case Report

Neuralgic amyotrophy (NA) is a peripheral neuropathy, primarily involving the brachial plexus. There is a relation between antecedent infection and NA. A few cases of NA after infections such as Epstein-Barr virus, herpes zoster virus, parvovirus, human immunodeficiency virus, Borrelia, and other infections have been reported. This case report describes a 26-year-old man with motor impairment after neuropathic pain with preceding mild flu-like symptoms whose laboratory studies revealed evidence of cytomegalovirus (CMV) infection. He was diagnosed with NA associated with CMV infection. In conclusion, CMV is a rare but possible pathogen of NA.

Effects of acute normovolemic hemodilution on healing of gastric anastomosis in rats

PURPOSE: Acute normovolemic hemodilution (ANH) is an autologous transfusion method, using blood collected during surgery, to reduce the need for allogeneic blood transfusion. ANH is controversial because it may lead to various complications. Among the possible complications, anastomotic leakage is one that would have a significant effect on the operation outcome. However, the relationship between ANH and anastomotic site healing requires additional research. Therefore, we conducted this prospective study of ANH, comparing it with standard intraoperative management, undergoing gastric anastomosis in rats. METHODS: Sixteen Sprague-Dawley rats were randomly assigned to three groups: group A, surgery with ANH; group N, surgery with standard intraoperative management; and group C, sham surgery with standard intraoperative management. ANH was performed in group A animals by, removing 5.8–6.6 mL of blood and replacing it with 3 times as much crystalloid. All rats were enthanized on postoperative day 6, and histopathologic analyses were performed. RESULTS: The mean hematocrit values, after hemodilution were 22.0% (range, 18.0%–29.0%), group A; 33.0% (29.0%–35.0%), group N; and 32.5% (29.0%–34.0%), group C. There were significant differences between groups A and N (P = 0.019, P = 0.009, P = 0.004, P = 0.039, and P = 0.027), and between groups N and C (P = 0.006, P = 0.027, P = 0.04, P = 0.008, and P = 0.009) with respect to inflammatory cell numbers, neovascularization, fibroblast numbers, edema and necrosis, respectively; there were no differences between groups A and N. CONCLUSION: In rat model, anastomotic complications did not increase in the ANH group, compared with the standard intraoperative management group.

Inquiry Survey of Infertile Couples for Sperm Donation and Artificial Insemination by Donor

BACKGROUND: Artificial insemination by donor (AID) is important to chance the pregnancy in male infertile couples by requiring appropriate medical, legal and ethical reviews. The purpose of this study was to investigate the perception changes of AID to collect the basic information for establishing the sperm donation, cryopreservation and artificial insemination management system. METHODS: We evaluated the people's thought of sperm donation, cryopreservation, and artificial insemination by donor by means of national inquiry survey from 247 infertile couples for 4 weeks from October 2016. The questionnaires were composed of 4 areas, and each questionnaire consisted of 15 items. Changes in the perception of AID by year were investigated after review of domestic journals. RESULTS: 67.6% of respondents knew the growth of couples with difficulty getting pregnant due to male infertility. 82.2% of respondents replied the necessary of sperm bank as a treatment option for infertility and 40.5% knew the donation and receipt system of sperm. In the survey of change perception of AID according to year, 37.5% and 39.5% of respondents were got information about AID from doctor in 2003 and 2004, but 49.6% from broadcasting in 2016. As a child grows up, 4.0% (2003), 9.0% (2014), and 42.8% (2016) of respondents answered to tell the child about AID. CONCLUSIONS: Infertile couple's thought of AID about the extension of opportunities for male infertility treatment is changed. In conclusion, it is necessary to establish institutional system of sperm donation, cryopreservation and artificial insemination prior to public sperm bank operation.

Effect of palmitoylethanolamide on inflammatory and neuropathic pain in rats / 대한마취과학회지

BACKGROUND: A growing body of evidence suggests that neuroinflammation, which is characterized by infiltration of immune cells, activation of mast cells and glial cells, and production of inflammatory mediators in the peripheral and central nervous systems, plays an important role in the induction and maintenance of chronic pain. Palmitoylethanolamide (PEA), which is a type of N-acylethanolamide and a lipid, has an anti-inflammatory effect. Relative to the anti-inflammatory effect, little is known about its analgesic effect in chronic pain. This study aimed to determine whether PEA relieves chronic inflammatory and neuropathic pain. METHODS: Male Sprague-Dawley rats were injured by transection of the left L5 and L6 spinal nerves to induce neuropathic pain or were injected with monoiodoacetic acid into the synovial cavity of knee joints to induce inflammatory pain. To assess the degree of pain, two kinds of stimuli - pressing von Frey filaments and wetting with acetone - were applied to the plantar surface of the rat to measure mechanical and cold sensitivity, respectively. Pain was measured by assessing behavioral responses, including paw withdrawal response threshold and paw withdrawal frequency upon stimulation. RESULTS: Neuropathic pain caused by spinal nerve transection (SNT) decreased the mechanical threshold and increased the frequency of response to acetone application. But, cold allodynia caused by SNT did not decrease the withdrawal frequency. Mechanical hyperalgesia caused by chronic inflammation was significantly reduced by both intraperitoneal and intra-articular injections of PEA. CONCLUSIONS: These outcomes revealed that PEA might be effective in relieving inflammatory and neuropathic pain, especially pain induced by mechanical hyperalgesia, but not cold allodynia.

Immune Tolerance of Human Dental Pulp-Derived Mesenchymal Stem Cells Mediated by CD4⁺CD25⁺FoxP3⁺ Regulatory T-Cells and Induced by TGF-β1 and IL-10

PURPOSE: Most studies on immune tolerance of mesenchymal stem cells (MSCs) have been performed using MSCs derived from bone marrow, cord blood, or adipose tissue. MSCs also exist in the craniofacial area, specifically in teeth. The purpose of this study was to evaluate the mechanisms of immune tolerance of dental pulp-derived MSC (DP-MSC) in vitro and in vivo. MATERIALS AND METHODS: We isolated DP-MSCs from human dental pulp and co-cultured them with CD4⁺ T-cells. To evaluate the role of cytokines, we blocked TGF-β and IL-10, separately and together, in co-cultured DP-MSCs and CD4⁺ T-cells. We analyzed CD25 and FoxP3 to identify regulatory T-cells (Tregs) by fluorescence-activated cell sorting (FACS) and real-time PCR. We performed alloskin grafts with and without DP-MSC injection in mice. We performed mixed lymphocyte reactions (MLRs) to check immune tolerance. RESULTS: Co-culture of CD4⁺ T-cells with DP-MSCs increased the number of CD4⁺CD25⁺FoxP3⁺ Tregs (p<0.01). TGF-β or/and IL-10 blocking suppressed Treg induction in co-cultured cells (p<0.05). TGF-β1 mRNA levels were higher in co-cultured DP-MSCs and in co-cultured CD4⁺ T-cells than in the respective monocultured cells. However, IL-10 mRNA levels were not different. There was no difference in alloskin graft survival rate and area between the DP-MSC injection group and the non-injection group. Nonetheless, MLR was reduced in the DP-MSC injected group (p<0.05). CONCLUSION: DP-MSCs can modulate immune tolerance by increasing CD4⁺CD25⁺FoxP3⁺ Tregs. TGF-β1 and IL-10 are factors in the immune-tolerance mechanism. Pure DP-MSC therapy may not be an effective treatment for rejection, although it may module immune tolerance in vivo.

A Rare Case of Intra-Areolar Polythelia

Among various types of supernumerary nipples, intra-areolar polythelia (IAP) is an extremely rare congenital malformation. The authors report a case of a young woman with unilateral IAP on her right breast. The patient was 24 years old; she had had it since she was 5 or 6 years old, and it had enlarged 3 to 4 years before presentation to our clinic. Surgical excision was performed under local anesthesia as a prophylaxis against breast cancer and cosmetic problems.

Development of Audio-visual Aids of Death Education for Hospice Patients and Their Families / 한국호스피스완화의료학회지

PURPOSE: Patients and their caretakers need to understand various problems and requirements in the dying process so that they may prepare for death for the rest of their remaining life. Accordingly, a systematic audio-visual resource was developed to educate hospice patients and their families at the palliative care ward about the process of dying. METHODS: For the development of an audio-visual resource, a initial education material was produced in the form of simple and accessible Power Point handouts based on literature study. Then, the program was completed through five rounds of a process, including expert advice, revision, update and evaluation. RESULTS: The final version of the program was filmed with cooperation of the medical literature information division. Using the program, patients and families were educated through five phases over three sessions for a total 26 minutes and 34 seconds. CONCLUSION: The significance of this study lies in the fact that it was conducted after the establishment of the palliative care ward, which made it easier for nurses provide the education. It is expected that the program may be used by hospice specialists as well as nurses as an education resource for hospice patients and their families.

Influence of acute normovolemic hemodilution on the potency and time course of action of rocuronium in rabbits

BACKGROUND: We performed this study to evaluate the potency and time course of rocuronium-induced neuromuscular block following moderate or severe acute normovolemic hemodilution (ANH) in rabbits. METHODS: Forty five rabbits were randomly assigned to the control (C) group, the moderate ANH (M) group, or the severe ANH (S) group. After stabilization of sevoflurane anesthesia, ANH was achieved by drainage of arterial blood and an intravenous infusion of 6% hydroxyethyl starch, during which hematocrit (Hct) decreased to 26.2 ± 2.5% in the M group and 17.6 ± 2.2% in the S group. We determined dose-response relationships of rocuronium in the three groups and created a time course of the action of 0.6 mg/kg rocuronium. RESULTS: The 50% effective dose (ED50) for rocuronium was 45% and 50% lower in the M and S groups, respectively, than in the C group (50.9 ± 6.3 µg/kg) (P < 0.001). The onset time after 0.6 mg/kg rocuronium was faster in the ANH groups compared with the C group (P < 0.001). The duration of neuromuscular block was prolonged by 38% and 43% in the M and S groups, respectively, compared with the C group (49.1 ± 6.9 min) (P < 0.001). CONCLUSIONS: ANH resulted in high potency, rapid onset, and prolonged duration of rocuronium. However, the severity of ANH did not alter the potency and duration of action of rocuronium.